How to cook steak on charcoal grill
How long does it take to make a steak on a charcoal grill?
Put steaks on the grill and cook them until golden and slightly charred, 4 to 5 minutes. Turn steaks and continue grilling for 3 to 5 minutes for rare (an internal temperature of 135 degrees F), 5-7 minutes for medium (140 degrees F) or 8 to 10 minutes for medium well (150 degrees F))
What is the best way to grill a steak on the charcoal grill?
Set up your coal with a hot zone for direct heating and a medium heat zone for indirect heating. You will want to use both to cook your steak. Put the steaks in the hot zone and let them rest for about two minutes and then give them a quarter of a turn.
How to make steak on the grill?
Place the steak on the hottest part of the grill, just above the embers, and let it seal for two to three minutes, then turn the steak and seal the other side for two to three minutes. During the sealing process, resist the temptation to move the steak with the tongs, as this avoids optimal grill marks.
At what temperature do you cook a steak on a charcoal grill?
Brush grills clean and set for direct, high heat. The best temperature for steaks is 450 ° F to 500 ° F. 4. Place the steaks on the grill, close the lid and set the timer for 2-3 minutes, depending on the thickness of the steak.
How many times do you turn a steak on the grill?
“You should only stir your steak three times; once to put it in the pot, once to turn it over and once to take it out of the pot. ”
Do you close the grill when you make a steak?
For thicker cuts, close the lid to keep the temperature high and even. Large steaks, chicken and roasts have much more depth for the heat to penetrate, and closing the lid gives the heat time to sink in and cook the meat like an oven.
How long should charcoal burn before grilling?
But how long are you going to let the embers burn? Let the charcoal or briquettes burn until they are covered with off-white ash (it takes about 5-10 minutes before charcoal reaches high heat and 25-30 minutes when it reaches medium heat).
What should I season my steak with?
Season the steak: Steaks do not need much to be good. Just before grilling, lightly brush them on both sides with oil and sprinkle with salt and pepper. If you want to look good, you can add spices such as chili powder, paprika or garlic powder to the mixture.
How long should you let a steak sit?
How long should you rest your meat? It all depends on the size of the meat, but as a guide, larger steaks should rest for 10-20 minutes and your steak should breathe for at least 5 minutes.
How long do I cook a steak on each side?
As a general rule of thumb (for a 22 mm thick steak) – cook 2 minutes per. Page too rare, 3-4 minutes per. Page for rare and 4-6 minutes per. This page is too rare. For well done, cook for 2-4 minutes on each side, then lower the heat and cook for another 4-6 minutes.
How much carbon should I use for steak?
When working with coal, the basic rule of thumb is that the more coal, the hotter the fire. You do not need much if you only make light things like burgers, dogs, brats. Maybe 15 to 20 coals will solve the problem. For example, if you want a very hot fire for frying steak, you need a lot more.
How to grill a 2-inch steak?
Use direct fire to cook a 2-inch thick steak. When the grid is medium high (you can hold your hand at the grid level for only 4-5 seconds), follow the instructions below; cook steak 20 to 25 minutes for rare, 27 to 30 minutes for medium. Use indirect heat to cook a 3 inch thick steak.
Do you grill steaks on high heat?
Make the grill steamy Of course you do not want to burn the food or light a fire, but when grilling a steak it is very important that you use as much heat as you can generate. This is because a high heat is cooked faster, and the less time your steak spends cooking, the softer it becomes.