How To Reset A Kidde Smoke Detector?

Reset alarm

• Disconnect the power to the smoke detector from the switch.
• Remove the smoke detector from the mounting bracket and turn off the power.
• Remove the battery.
• Press and hold the test button for at least 15 seconds.
• Reconnect the power supply and reinsert the battery.

How to reset the smoke detector?

1. Reset the smoke detector

1. Disconnect power to the smoke detector from the switch.
2. Remove the detector from its mounting bracket and turn off the power.
3. Remove the battery from the smoke detector (if equipped).
4. When the battery is removed, press and hold the test button for 15-20 seconds.

Why does the Kidde smoke detector look like me?

If the smoke detector continues to sound, the cause may be one of the following: The battery may need to be replaced. The smoke detector may have reached the end of its service life (only for models with sealed batteries). The alarm will sound every 30 seconds to indicate that it is time to change the alarm.

How do I reset the smoke detector after replacing the battery?

Remove the detector from its mounting bracket and turn off the power. Remove the battery from the smoke detector. Once the battery is removed, press and hold the test button for 15-20 seconds. Replace the new battery in the detector and turn on the power.

How to prevent a smoke detector alarm?

Why is there a cable smoke detector?

• Locate the reset button on the surface of the smoke detector.
• Hold the position for 15 to 20 seconds, then relax.
• Wait a few minutes and listen to the tweet again.

Why does my smoke detector keep ringing even with a new battery?

If you’ve replaced the fireplace detector’s battery and it’s still ringing, you may think your detector is faulty. Once the battery is removed, press and hold the test button for 15-20 seconds. Replace the new battery in the detector and turn on the power. Reset switch power.

How to reset the smoke detector?

1. Reset the smoke detector

1. Disconnect power to the smoke detector from the switch.
2. Remove the detector from its mounting bracket and turn off the power.
3. Remove the battery from the smoke detector (if equipped).
4. When the battery is removed, press and hold the test button for 15-20 seconds.

How to prevent sound from Kidde smoke detector?

Reset alarm

• Disconnect the power to the smoke detector from the switch.
• Remove the smoke detector from the mounting bracket and turn off the power.
• Remove the battery.
• Press and hold the test button for at least 15 seconds.
• Reconnect the power supply and reinsert the battery.

Why does my smoke detector still work after I replace the battery?

If you’ve replaced the fireplace detector’s battery and it’s still ringing, you may think your detector is faulty. Remove the detector from its mounting bracket and turn off the power. Remove the battery from the smoke detector. Once the battery is removed, press and hold the test button for 15-20 seconds.

Why is the red light on my smoke detector flashing?

A flashing red light gives a visual indication that the smoke alarm is working properly. It also indicates that the working battery is connected to the smoke detector.